Bona Toner White
Bona Toner White is a water-soluble pigment additive in a pre-measured 100 ml bottle, part of the Bona Additive+ range. Mix it into a Bona waterborne primer (e.g. Classic UX) or lacquer to tint the floor on the job instead of stocking pre-pigmented products. Available in White, Natural, Amber and Black; the White version creates or boosts a whitewashed, toned-down look on lighter species.
Specs
- Type: water-based pigment additive (Bona Additive+ range)
- Pack: 100 ml pre-measured bottle
- Colours: White, Natural, Amber, Black
- Mixing ratio: 1 bottle (100 ml) per 5 L of primer or lacquer
- Best with: matt / extra-matt topcoats; Bona TanninShield on light high-tannin species
- Shelf life: approx. 2 years unopened
Method
Sand to bare timber, dust off. Add one bottle per 5 L, mix well, apply along the grain. Build the white over multiple tinted coats, then finish with two clear matt/extra-matt Bona topcoats. Test on a sample first - Australian hardwoods will not go as white as oak.
Safety (Bona SDS)
Not classified as hazardous under CLP/GHS. Contains trace isothiazolinone preservatives (BIT + CMIT/MIT) - may produce an allergic reaction; wear gloves and eye protection, ventilate, keep out of drains. First aid: eyes rinse 10+ min; skin soap and water (no solvents); do not induce vomiting if swallowed. SDS: https://www.bona.com/globalassets/catalogassets/sds-bona-toner-white---default-english-gb.pdf