← Back

Bona Toner Amber

Semi-transparent amber pigment additive. Warm the timber to an oil-tone glow without the oil-based smell.

What it is

Bona Toner Amber is a water-soluble pigment additive in a pre-measured 100 ml bottle, part of Bona's Additive+ range. It's semi-transparent -- you mix it into a Bona waterborne primer or lacquer to add a warm amber tone that enriches the timber, the way an old-school oil-modified finish does, but in a low-odour waterborne system. Used with Bona Intense primer it replicates the look of the original Bona Amber primer.

Why installers use it

Coverage & specs

How to apply

Sand to bare timber and dust off. Shake the bottle hard for 60 seconds, add one bottle per 5 L and stir. Best results come from tinting the primer rather than the lacquer. Standard schedule is two primer coats with the toner, then one to two clear lacquer coats; add toner to a lacquer coat for a deeper tone. Stagger start, stop and overlap points coat to coat. Always lay a sample board in the actual species first -- Toner Amber is for colouration, not for turning a dark species light (use Bona Craft Oil 2K for that).

Safety (from the Bona SDS)

Not classified as hazardous under CLP/GHS -- no signal word or pictograms. Contains trace isothiazolinone preservatives and may produce an allergic reaction on sensitive skin. Wear gloves and eye protection, ventilate, and keep out of drains and watercourses.

First aid: eyes - rinse 10+ minutes; skin - soap and water (not solvents); do not induce vomiting if swallowed. Technical detail: Bona Toner TDS (PDF). Colour-specific SDS available from Bona on request.

Want the amber glow?

Ring with the species and the square meters and we'll set you up with the primer, the lacquer and the number of tinted coats for the warmth you're after.

Call 1300 950 551

The rest of the range

Toner White, Toner Natural, Toner Black. See the method in our guide: tinting a floor with Bona Toner →

See the full range · Related FAQs →